Westerbeke 4.5 KW BGC -60Hz Návod k obsluze stáhnout pdf (Strana 78)

Governor

Maintenance

1.

Periodically lubricate the attaching points at both ends of the governor arm. Use a graphite lubricant or

an equivalent.

NOTE: Free movement

of

this linkage arm is important for proper governor/throttle operation.

2.

Governor oil

capac~y:

BCG 4.0KW

is

1.5 ounces

of

SAE

#10/30

motor

oil.

BCG

6.5KW

is

3.0 ounces

of

SAE

#10/30

motor

oil.

NOTE: Do not overfill the governor.

3.

Change the governor's oil every 1000 hours of operation.

4.

The drive belt should be maintained in good condition. Replace the belt if it becomes worn or shows signs

of

cracking.

To

change the oil, remove the governor from engine and remove the oil fill and fill level plug and drain all the

oil from the governor. Reinstall the governor on the engine and fill it with the proper quantity

of

SAE

10/30

engine oil, and replace the plugs.

75 Westerbeke Generators

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 94 95

Komentáře k této Příručce

Žádné komentáře